[. . . ] Gently twist the center conductor to bind any loose strands and carefully apply a very thin, even layer of solder to it. [. . . ] Slide the metal washer and the Teflon spacer onto the cable in the order illustrated. (See Tech Note)
DooDad®
®
Coupling Ring
STEP 5
Solder tip to center conductor here Connector Body Solder braid to connector body through holes
Slide DooDad Cable Strain Relief, coupling ring and reducing adapter onto the cable in the order and orientation shown.
Outer Jacket
STEP 2
¾"
Prepare the cable according to the dimensions shown above.
3
(See Tech Note) Screw the reducing adapter into the connector body tightly and solder the tip to the center conductor. At Step 5, solder the tip, and then solder the braid to the connector body through the four small holes in the connector body. Complete the installation as described above.
35-90-1262-00
1
/8"
Finished connector showing cutaway view of DooDad®
5
/8"
Shakespeare Electronic Products Group
200 Business Park Blvd. , Columbia, SC 29203 · 803-227-1590 · Fax: 803-419-3099
Fan the braid back, as illustrated, and trim it to 3/8". [. . . ] Complete the installation as described above.
35-90-1262-00
1
/8"
Finished connector showing cutaway view of DooDad®
5
/8"
Shakespeare Electronic Products Group
200 Business Park Blvd. , Columbia, SC 29203 · 803-227-1590 · Fax: 803-419-3099
Fan the braid back, as illustrated, and trim it to 3/8". [. . . ]